中文
Hotline
Home > Product center > Product

Capacitor

Harmonics is actually a kind of interference. When injected into the public power grid, the electricity will be "contaminated". Higher harmonics will directly harm the electrical equipment, causing overheating of the cable, phase-to-phase short circuit and grounding fault, zero-crossing noise. Waste system capacity, increased power system loss, accelerated insulation aging, reduced system power factor, reduced protection and misoperation of medical equipment. In recent years, with the advent of the economic and information age, electronic computers, precision medical instruments, microprocessors and other digital electronic devices are becoming more and more popular. These electrical devices have high requirements for the harmonic quality of power supplies. When it comes to higher harmonics, there are often program running errors, data corruption, time delays, crashes, re-starting for no reason, and even permanent damage, causing huge losses to people's work and daily life.
The company is based on the development of the power industry, changing the increasingly poor power quality, and actively introducing the CBH-X system harmonic protector independently developed by the latest technology, which can absorb harmonic interference of various frequencies and various energies. Eliminate the wave at the source, and automatically eliminate the interference of random high harmonics and high-noise noise pulse spikes and surges generated by the power equipment. The intelligent wave protector can purify the power source, protect the power equipment and the power factor compensation device, and prevent the false trip of the protection device, thereby protecting the equipment safely and efficiently.

Features
Special circuit with ultra-fine crystal alloy with flame retardant material and innovative technology
Inhibition and absorption of high harmonics, high noise, pulse spikes, surges, etc.
Track voltage and current waveforms at any time to correct voltage and current waveforms that are distorted by harmonic influences
Reduce the failure rate of power equipment and machine misoperation, and fully overcome the high interference caused by harmonic pollution
The device itself consumes almost no power and has high economic benefits.
Reasonable structure design, simple wiring, convenient installation and debugging

Technical ParametersApplication range

CBH-X series CBH-X1000-3-400 (three phase) CBH-X1000-1-230 (single phase)
Rated voltage / rated power 110-690V ±20%; 50Hz 60Hz
Electric pulse current value 14000A
Clamp voltage value For a surge voltage of 2500, it can be limited to 1000V or less
Anti-surge current For a surge voltage of 2500V, the surge current does not exceed 1200A
Circuit connection Star or angle
Absolute green resistance >2MΩ
Pressure/contact point capacity 2000VAC between the conductive part and the outer casing, time 01 seconds, no breakdown and flashover / 120A
Filtering performance Protection frequency 1KHZ-20MHZ
Leakage current 1.428mA
External environment temperature range -35°C-75°C
Storage temperature 45°C-90°C
Relative temperature <85%
Atmospheric pressure 52-108Kpa
External environment working environment No explosive, non-corrosive gas, conductive dust, no bacteria, no shock, no impact source, below 3000M
Dimensions (length x width x height) 128mm x 67mm x 95mm
Electromagnetic compatibility test Shock wave immunity IEC60225-22-4
Electrostatic discharge immunity
Radio frequency electromagnetic radiation immunity
Electrical fast transient burst immunity
power supply Power consumption Less than 0.5w
Fever Less than 25 ° C (external environment 20 ° C)
Shell type Metal and flame retardant materials
Shell maintenance method Maintenance free
Service life More than 15 years
Wiring Terminal block connection
Weight 1.4kg